In a message dated 3/11/2012 6:52:03 P.M. Eastern Daylight Time,=20 akelley@optonline.net writes:

Jack,

Welcome aboard!

I am catching up on class admin stuff right now. Have= you=20 renamed the boat yet? Feel free to forward me photos and any inform= ation=20 and I will post it on your boat's page on our site.

Hope to see you this summer,

Art

"Brilliant"

On Sun, Jan 29, 2012 at 10:28 AM, Comodore2@aol.com=20 wrote:

Frers 33 Class,

I have acquired Hull# 11 (More Magic) . She will be sailed = out of=20 the Milford Yacht Club.

I am looking foreword to being an active member of the clas= s.=20

Jack Greifzu

=3D

--part1_159c1.7fb416c4.3c911db5_boundary-- From frers-list@lists.frers33.com Fri Mar 30 18:45:26 2012 From: frers-list@lists.frers33.com (frers-list@lists.frers33.com) Date: Fri, 30 Mar 2012 13:45:26 -0400 (EDT) Subject: [frers-list]Engine Exhaust & Rudder Bearings. Message-ID: <1131c.d3d5871.3ca74b36@aol.com> --part1_1131c.d3d5871.3ca74b36_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Does anyone know the length and diameter of the Exhaust Hose? Has anyone had their rudder bearings changed by a yard? If so, which yard? and what was the cost to have a yard do the work? JacK Greifzu --part1_1131c.d3d5871.3ca74b36_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Does anyone know the length and diameter of the Exhaust Hose?

Has anyone had their rudder bearings changed by a yard? If so, which y= ard?=20 and what was the cost to have a yard do the work?

JacK Greifzu

--part1_1131c.d3d5871.3ca74b36_boundary-- From frers-list@lists.frers33.com Fri Mar 30 23:56:27 2012 From: frers-list@lists.frers33.com (Robert Connell) Date: Fri, 30 Mar 2012 15:56:27 -0700 (PDT) Subject: [frers-list]Engine Exhaust & Rudder Bearings. In-Reply-To: <1131c.d3d5871.3ca74b36@aol.com> Message-ID: <1333148187.37906.YahooMailClassic@web161405.mail.bf1.yahoo.com> --1298779297-268423765-1333148187=:37906 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Jack, I can get you the lenghts tomorrow. Do you need the section from the = engine to the muffler or from the muffler to the transom. Jeffa makes repla= cement bearings for the original in Harken,they are not cheap. We replaced = the bearings in Salsa last year, she was a tiller boat so it was less. I ca= n get you part numbers. Jack are you replacing the exhaust elbow? If it is = original I would recomend=A0it as it is probably plugged up. If you would l= ike call my cell 860-227-1934=A0 --- On Fri, 3/30/12, Comodore2@aol.com wrote: From: Comodore2@aol.com Subject: [frers-list]Engine Exhaust & Rudder Bearings. To: frers-list@lists.frers33.com Date: Friday, March 30, 2012, 1:45 PM Does anyone know the length and diameter of the Exhaust Hose? =A0 Has anyone had their rudder bearings changed by a yard? If so, which yard? = and what was the cost to have a yard do the work?=20 =A0 JacK Greifzu =A0 =A0 --1298779297-268423765-1333148187=:37906 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable

Jack, I can get you the lenghts tomorrow. Do = you need the section from the engine to the muffler or from the muffler to = the transom. Jeffa makes replacement bearings for the original in Harken,th= ey are not cheap. We replaced the bearings in Salsa last year, she was a ti= ller boat so it was less. I can get you part numbers. Jack are you replacin= g the exhaust elbow? If it is original I would recomend it as it is pr= obably plugged up. If you would like call my cell 860-227-1934
--- On Fri, 3/30/12, Comodore2@aol.com <Comodore2@aol.com>= wrote:

From: Comodore2@aol.com <Comodore2@aol.com>=
Subject: [frers-list]Engine Exhaust & Rudder Bearings.
To: frers= -list@lists.frers33.com
Date: Friday, March 30, 2012, 1:45 PM

Does anyone know the length and diameter of the Exhaust Hose?

Has anyone had their rudder bearings changed by a yard? If so, which y= ard? and what was the cost to have a yard do the work?

JacK Greifzu

--1298779297-268423765-1333148187=:37906-- From frers-list@lists.frers33.com Sat Mar 31 02:30:42 2012 From: frers-list@lists.frers33.com (frers-list@lists.frers33.com) Date: Fri, 30 Mar 2012 21:30:42 -0400 (EDT) Subject: [frers-list]Engine Exhaust & Rudder Bearings. Message-ID: <3304b.3345972f.3ca7b842@aol.com> --part1_3304b.3345972f.3ca7b842_boundary Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit section from muffler to transom. Not replacing Elbow at this time, I'm correcting major problems on survey. Jack In a message dated 3/30/2012 6:57:02 P.M. Eastern Daylight Time, conn2523@yahoo.com writes: Jack, I can get you the lenghts tomorrow. Do you need the section from the engine to the muffler or from the muffler to the transom. Jeffa makes replacement bearings for the original in Harken,they are not cheap. We replaced the bearings in Salsa last year, she was a tiller boat so it was less. I can get you part numbers. Jack are you replacing the exhaust elbow? If it is original I would recomend it as it is probably plugged up. If you would like call my cell 860-227-1934 --- On Fri, 3/30/12, Comodore2@aol.com wrote: From: Comodore2@aol.com Subject: [frers-list]Engine Exhaust & Rudder Bearings. To: frers-list@lists.frers33.com Date: Friday, March 30, 2012, 1:45 PM Does anyone know the length and diameter of the Exhaust Hose? Has anyone had their rudder bearings changed by a yard? If so, which yard? and what was the cost to have a yard do the work? JacK Greifzu --part1_3304b.3345972f.3ca7b842_boundary Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

section from muffler to transom. Not replacing Elbow at this time, I'm= =20 correcting major problems on survey.

Jack

In a message dated 3/30/2012 6:57:02 P.M. Eastern Daylight Time,=20 conn2523@yahoo.com writes:

Jack, I can get you the lenghts tomorrow. Do you nee= d the=20 section from the engine to the muffler or from the muffler to the= =20 transom. Jeffa makes replacement bearings for the original in=20 Harken,they are not cheap. We replaced the bearings in Salsa last y= ear,=20 she was a tiller boat so it was less. I can get you part numbers. J= ack=20 are you replacing the exhaust elbow? If it is original I would=20 recomend it as it is probably plugged up. If you would like ca= ll my=20 cell 860-227-1934

--- On Fri, 3/30/12, Comodore2@ao= l.com=20 <Comodore2@aol.com> wrote:

From:=20 Comodore2@aol.com <Comodore2@aol.com>
Subject:=20 [frers-list]Engine Exhaust & Rudder Bearings.
To:=20 frers-list@lists.frers33.com
Date: Friday, March 30, 2012, 1:4= 5=20 PM

Does anyone know the length and diameter of the Exhaust=20 Hose?

Has anyone had their rudder bearings changed by a yard? If s= o,=20 which yard? and what was the cost to have a yard do the work?

JacK Greifzu

--part1_3304b.3345972f.3ca7b842_boundary-- From frers-list@lists.frers33.com Sat Mar 31 15:31:52 2012 From: frers-list@lists.frers33.com (Stephen, Robert) Date: Sat, 31 Mar 2012 14:31:52 +0000 Subject: [frers-list]Engine Exhaust & Rudder Bearings. In-Reply-To: <1333148187.37906.YahooMailClassic@web161405.mail.bf1.yahoo.com> References: <1131c.d3d5871.3ca74b36@aol.com> <1333148187.37906.YahooMailClassic@web161405.mail.bf1.yahoo.com> Message-ID: <1A6A3F1ED0C9554B87B4531ABB26D6F00B04A4CD@M4DAG1.weberstephen.com> --_000_1A6A3F1ED0C9554B87B4531ABB26D6F00B04A4CDM4DAG1weberstep_ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Thanks for this info. I have a frers 36 and was wondering where to get this= as my bearing is showing signs of excess friction. There is a zerk fitting= in the post for the added grease but is this common in all of the carol ma= rine frers models? Thanks again Bob Stephen Itchy Magoo Chicago From: frers-list-admin@lists.frers33.com [mailto:frers-list-admin@lists.fre= rs33.com] On Behalf Of Robert Connell Sent: Friday, March 30, 2012 5:56 PM To: frers-list@lists.frers33.com Subject: Re: [frers-list]Engine Exhaust & Rudder Bearings. Jack, I can get you the lenghts tomorrow. Do you need the section from the = engine to the muffler or from the muffler to the transom. Jeffa makes repla= cement bearings for the original in Harken,they are not cheap. We replaced = the bearings in Salsa last year, she was a tiller boat so it was less. I ca= n get you part numbers. Jack are you replacing the exhaust elbow? If it is = original I would recomend it as it is probably plugged up. If you would lik= e call my cell 860-227-1934 --- On Fri, 3/30/12, Comodore2@aol.com wrote: From: Comodore2@aol.com Subject: [frers-list]Engine Exhaust & Rudder Bearings. To: frers-list@lists.frers33.com Date: Friday, March 30, 2012, 1:45 PM Does anyone know the length and diameter of the Exhaust Hose? Has anyone had their rudder bearings changed by a yard? If so, which yard? = and what was the cost to have a yard do the work? JacK Greifzu ________________________________ This email is intended solely for use by its addressee, and may contain con= fidential or legally privileged information. If you receive this message in= error, please immediately email a reply to advise the sender of the error = and delete this email and any attachments. Thank you. Weber-Stephen Product= s LLC --_000_1A6A3F1ED0C9554B87B4531ABB26D6F00B04A4CDM4DAG1weberstep_ Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Thanks for this info. I= have a frers 36 and was wondering where to get this as my bearing is showi= ng signs of excess friction. There is a zerk fitting in the post for the added grease but is this common in all of the carol marin= e frers models?

Thanks again

Bob Stephen

Itchy Magoo

Chicago

From: frers-= list-admin@lists.frers33.com [mailto:frers-list-admin@lists.frers33.com] On Behalf Of Robert Connell
Sent: Friday, March 30, 2012 5:56 PM
To: frers-list@lists.frers33.com
Subject: Re: [frers-list]Engine Exhaust & Rudder Bearings.

Jack, I can get you the lenghts tomorrow. Do you nee= d the section from the engine to the muffler or from the muffler to the tra= nsom. Jeffa makes replacement bearings for the original in Harken,they are = not cheap. We replaced the bearings in Salsa last year, she was a tiller boat so it was less. I can get you pa= rt numbers. Jack are you replacing the exhaust elbow? If it is original I w= ould recomend it as it is probably plugged up. If you would like call = my cell 860-227-1934

--- On Fri, 3/30/12, Comodore2@aol.com <Comodore2@aol.com><= /b> wrote:

From: Comodore2@aol.com <Comodore2@aol.com>
Subject: [frers-list]Engine Exhaust & Rudder Bearings.
To: frers-list@lists.frers33.com
Date: Friday, March 30, 2012, 1:45 PM

Does anyone know the length= and diameter of the Exhaust Hose?

Has anyone had their rudder= bearings changed by a yard? If so, which yard? and what was the cost to ha= ve a yard do the work?

JacK Greifzu

This email is intended solely for use by its addressee, and may contain con= fidential or legally privileged information. If you receive this message in= error, please immediately email a reply to advise the sender of the error = and delete this email and any attachments. Thank you. Weber-Stephen Products LLC

--_000_1A6A3F1ED0C9554B87B4531ABB26D6F00B04A4CDM4DAG1weberstep_-- From frers-list@lists.frers33.com Sat Mar 31 22:51:20 2012 From: frers-list@lists.frers33.com (Robert Connell) Date: Sat, 31 Mar 2012 14:51:20 -0700 (PDT) Subject: [frers-list]Engine Exhaust & Rudder Bearings. In-Reply-To: <3304b.3345972f.3ca7b842@aol.com> Message-ID: <1333230680.46039.YahooMailClassic@web161406.mail.bf1.yahoo.com> --122454116-1361723635-1333230680=:46039 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Jack, I did not measearure the section aft of the muffler, can do so tomorr= ow, the fwd section is 3' and 2" diameter. I will be back at the boat tomor= row and get the aft length that may vary depending on how=A0 much a loop th= ere is. --- On Fri, 3/30/12, Comodore2@aol.com wrote: From: Comodore2@aol.com Subject: Re: [frers-list]Engine Exhaust & Rudder Bearings. To: frers-list@lists.frers33.com Date: Friday, March 30, 2012, 9:30 PM section from muffler to transom. Not replacing Elbow at this time, I'm corr= ecting major problems on survey. Jack =A0 In a message dated 3/30/2012 6:57:02 P.M. Eastern Daylight Time, conn2523@y= ahoo.com writes: Jack, I can get you the lenghts tomorrow. Do you need the section from the = engine to the muffler or from the muffler to the transom. Jeffa makes repla= cement bearings for the original in Harken,they are not cheap. We replaced = the bearings in Salsa last year, she was a tiller boat so it was less. I ca= n get you part numbers. Jack are you replacing the exhaust elbow? If it is = original I would recomend=A0it as it is probably plugged up. If you would l= ike call my cell 860-227-1934=A0 --- On Fri, 3/30/12, Comodore2@aol.com wrote: From: Comodore2@aol.com Subject: [frers-list]Engine Exhaust & Rudder Bearings. To: frers-list@lists.frers33.com Date: Friday, March 30, 2012, 1:45 PM Does anyone know the length and diameter of the Exhaust Hose? =A0 Has anyone had their rudder bearings changed by a yard? If so, which yard? = and what was the cost to have a yard do the work?=20 =A0 JacK Greifzu =A0 =A0 --122454116-1361723635-1333230680=:46039 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable --122454116-1361723635-1333230680=:46039--

Jack, I did not measearure the section aft of= the muffler, can do so tomorrow, the fwd section is 3' and 2" diameter. I = will be back at the boat tomorrow and get the aft length that may vary depe= nding on how much a loop there is.

--- On Fri, 3/30/12, Com= odore2@aol.com <Comodore2@aol.com> wrote:

From: Comodore2@aol.com <Comodore2@aol.com>=
Subject: Re: [frers-list]Engine Exhaust & Rudder Bearings.
To: f= rers-list@lists.frers33.com
Date: Friday, March 30, 2012, 9:30 PM

section from muffler to transom. Not replacing Elbow at this time, I'm= correcting major problems on survey.

Jack

In a message dated 3/30/2012 6:57:02 P.M. Eastern Daylight Time, conn2= 523@yahoo.com writes:

Jack, I can get you the lenghts tomorrow. Do you need the = section from the engine to the muffler or from the muffler to the transom. = Jeffa makes replacement bearings for the original in Harken,they are not ch= eap. We replaced the bearings in Salsa last year, she was a tiller boat so = it was less. I can get you part numbers. Jack are you replacing the exhaust= elbow? If it is original I would recomend it as it is probably plugge= d up. If you would like call my cell 860-227-1934

--- On Fr= i, 3/30/12, Comodore2@aol.com <Comodore2@aol.com> wrote:

From: Comodore2@aol.com <Comodore2@aol.com>=
Subject: [frers-list]Engine Exhaust & Rudder Bearings.
To: frers= -list@lists.frers33.com
Date: Friday, March 30, 2012, 1:45 PM

Does anyone know the length and diameter of the Exhaust Hose?

Has anyone had their rudder bearings changed by a yard? If so, which y= ard? and what was the cost to have a yard do the work?

JacK Greifzu

=