From frers-list@lists.frers33.com Sat Feb 2 01:40:18 2013 From: frers-list@lists.frers33.com (Michael Argyelan) Date: Fri, 1 Feb 2013 19:40:18 -0600 Subject: [frers-list]Selden Removable Bowsprit Message-ID: --e89a8f83ab5f389ab604d4b3f189 Content-Type: text/plain; charset=ISO-8859-1 I bought and installed a Selden sprit last year and it was great for short-handed sailing. However, I'm sort of over it and wondering if anyone has any interest in one. I have an asym to go with it if there's an interest in that as well. Figured I'd start here and go from there. Thanks to all for the great replies to my other posts. I'm going to work with the head rigger at the yard and my local sail maker to get the tune job on the rig just right. I'll keep everyone in the loop if there's interest in the results. Cheers, Michael Argyelan --e89a8f83ab5f389ab604d4b3f189 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable I bought and installed a Selden sprit last year and it was great for short-= handed sailing. However, I'm sort of over it and wondering if anyone ha= s any interest in one.=A0 I have an asym to go with it if there's an in= terest in that as well.=A0 Figured I'd start here and go from there.=A0= Thanks to all for the great replies to my other posts.=A0 I'm going to= work with the head rigger at the yard and my local sail maker to get the t= une job on the rig just right.=A0 I'll keep everyone in the loop if the= re's interest in the results.

Cheers,

=A0
Michael Argyelan

--e89a8f83ab5f389ab604d4b3f189-- From frers-list@lists.frers33.com Sat Feb 2 19:42:33 2013 From: frers-list@lists.frers33.com (Robert Farnum) Date: Sat, 2 Feb 2013 14:42:33 -0500 Subject: [frers-list]Yacht Racing Association of Long Island Sound Message-ID: <000001ce017d$7235eec0$56a1cc40$@sbcglobal.net> This is a multipart message in MIME format. ------=_NextPart_000_0001_01CE0153.896257C0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit I checked the YRALIS certificate holders for last year: Audacious Farnum 40852 A.W.O.L Horton 47308 Bon Coeur Arnold Lesser 41547 Brilliant Kelly, Jr 42833 Checkmate Joyce Oberdorf 40697 Brilliant and Audacious have been at the Branford/Pine Orchard series. Any chance of the others making it this year? No need to get an ECSA certificate since we are racing one design. Bob Farnum ------=_NextPart_000_0001_01CE0153.896257C0 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

I checked = the YRALIS certificate holders for last year:

Audacious &nbs= p; = Farnum &= nbsp; 40852

A.W.O.L = = Horton &= nbsp; 47308

Bon = Coeur Arnold = Lesser 41547

Brilliant &nbs= p; Kelly, = Jr = ; 42833

Checkmate &nbs= p; Joyce Oberdorf 40697

Brilliant = and Audacious have been at the Branford/Pine Orchard series. Any chance = of the others making it this year? No need to get an ECSA certificate = since we are racing one design.

Bob = Farnum

------=_NextPart_000_0001_01CE0153.896257C0-- From frers-list@lists.frers33.com Sun Feb 3 00:00:08 2013 From: frers-list@lists.frers33.com (Bill Thompson) Date: Sat, 02 Feb 2013 16:00:08 -0800 Subject: [frers-list]Replace cabin sole Message-ID: <6E52EF92-031F-4DFD-91FB-365792DE2E21@videotron.ca> Hi all, Want to replace original - I think 1/4" teak and holly veneer over marine plywood. Does anyone know where to find a supplier? Because I'm in Canada would be happy to buy the veneer and apply it to locally available marine plywood. All ideas appreciated. Bill Thompson d'Ad lib Montreal William Thompson Sent from my iPad From frers-list@lists.frers33.com Sun Feb 3 00:57:49 2013 From: frers-list@lists.frers33.com (FRANCIS ALBERT) Date: Sat, 2 Feb 2013 16:57:49 -0800 (PST) Subject: [frers-list]Replace cabin sole In-Reply-To: <6E52EF92-031F-4DFD-91FB-365792DE2E21@videotron.ca> Message-ID: <1359853069.28230.YahooMailClassic@web181401.mail.ne1.yahoo.com> ---1540918134-961702829-1359853069=:28230 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Bill, =A0 Most marine wood shops will have the teak and holly floor and a single 4 by= 8 sheet will do the job.=A0=A0 If you can't find it locally you could orde= r it at the link below.=A0 They ship world wide.=20 =A0 http://www.jamestowndistributors.com/userportal/show_product.do?pid=3D51940 =A0 First off I think it's 1/2 inch not 1/4.=A0 The other hard part is that whe= n you remove the current floor you'll find that the edges are cut at an ang= le in towards the center of the boat.=A0 It is very difficult, not impossib= le but hard, to get a good measurement on the cut out.=A0 With a proper cut= out the floor will slide down into the grove along the edge and be very cl= ose to a perfect fit. =A0 My advise would be to first test your measurement and cutting skills on som= e scrap 4 by 4 pieces of plywood and see where you need to adjust cutting o= r measurements.=A0=20 =A0 I've done it and there's nothing like a brand new floor but it's a good siz= e job. =A0 Good luck =A0 Frank Albert --- On Sat, 2/2/13, Bill Thompson wrote: From: Bill Thompson Subject: [frers-list]Replace cabin sole To: frers-list@lists.frers33.com Date: Saturday, February 2, 2013, 7:00 PM Hi all, Want to replace original - I think 1/4" teak and holly veneer over marine p= lywood. Does anyone know where to find a supplier? Because I'm in Canada wo= uld be happy to buy the veneer and apply it to locally available marine ply= wood. All ideas appreciated. Bill Thompson d'Ad lib Montreal William Thompson Sent from my iPad _______________________________________________ firers-list mailing list frers-list@lists.frers33.com http://lists.frers33.com/mailman/listinfo/frers-list ---1540918134-961702829-1359853069=:28230 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable

Bill,

Most marine wood shops will have the teak and holly floor and a single= 4 by 8 sheet will do the job. If you can't find it locally you= could order it at the link below. They ship world wide.

http://www.jamestowndistributors.com/userportal/show_prod= uct.do?pid=3D51940

First off I think it's 1/2 inch not 1/4. The other hard part is = that when you remove the current floor you'll find that the edges are cut a= t an angle in towards the center of the boat. It is very difficult, n= ot impossible but hard, to get a good measurement on the cut out. Wit= h a proper cut out the floor will slide down into the grove along the edge = and be very close to a perfect fit.

My advise would be to first test your measurement and cutting skills o= n some scrap 4 by 4 pieces of plywood and see where you need to adjust cutt= ing or measurements.

I've done it and there's nothing like a brand new floor but it's a goo= d size job.

Good luck

Frank Albert

--- On Sat, 2/2/13, Bill Thompson <foredeck@videotron.ca&= gt; wrote:

From: Bill Thompson <foredeck@videotron.ca>=
Subject: [frers-list]Replace cabin sole
To: frers-list@lists.frers33= .com
Date: Saturday, February 2, 2013, 7:00 PM

Hi all,

Want to replace original - I think 1/= 4" teak and holly veneer over marine plywood. Does anyone know where to fin= d a supplier? Because I'm in Canada would be happy to buy the veneer and ap= ply it to locally available marine plywood.

All ideas appreciated.
Bill Thompson
d'Ad lib
Montreal

William Thompson
Sent= from my iPad
_______________________________________________
firers-= list mailing list
frers-list@lists.frers33.com
http://lists.frers33.com/= mailman/listinfo/frers-list

---1540918134-961702829-1359853069=:28230-- From frers-list@lists.frers33.com Sun Feb 3 10:09:08 2013 From: frers-list@lists.frers33.com (Rod Stright) Date: Sun, 03 Feb 2013 06:09:08 -0400 Subject: [frers-list]Replace Cabin Sole Message-ID: <000401ce01f6$81b21f80$85165e80$@ca> This is a multi-part message in MIME format. ------=_NextPart_000_0005_01CE01D4.FAA07F80 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit Hi Bill, There a couple of suppliers here in Halifax. There should be some in Montreal/Toronto. It is 3/4" Marine Teak and Holly cabin sole. It isn't cheap but I am confident someone there should have it in stock. Regards The other Canadian Frers 33 Owner. Rod ------=_NextPart_000_0005_01CE01D4.FAA07F80 Content-Type: text/html; charset="US-ASCII" Content-Transfer-Encoding: quoted-printable

Hi= Bill,

Th= ere a couple of suppliers here in Halifax. There should be some in = Montreal/Toronto. It is 3/4" Marine Teak and Holly = cabin sole. It isn't cheap but I am confident someone there = should have it in stock.

Re= gards

Th= e other Canadian Frers 33 Owner.

Ro= d

------=_NextPart_000_0005_01CE01D4.FAA07F80-- From frers-list@lists.frers33.com Sun Feb 3 12:55:15 2013 From: frers-list@lists.frers33.com (FRANCIS ALBERT) Date: Sun, 3 Feb 2013 04:55:15 -0800 (PST) Subject: [frers-list]Replace Cabin Sole In-Reply-To: <000401ce01f6$81b21f80$85165e80$@ca> Message-ID: <1359896115.98790.YahooMailClassic@web181404.mail.ne1.yahoo.com> ---1964014314-550056557-1359896115=:98790 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Bill, =A0 Actually in retrospect Rod is correct it is 3/4 inch.=A0=20 =A0 Frank Albert --- On Sun, 2/3/13, Rod Stright wrote: From: Rod Stright Subject: [frers-list]Replace Cabin Sole To: frers-list@lists.frers33.com Date: Sunday, February 3, 2013, 5:09 AM Hi Bill, =A0 There a couple of suppliers here in Halifax. There should be some in Montre= al/Toronto.=A0 It is 3/4"=A0 Marine Teak and Holly cabin sole.=A0=A0 It isn= 't cheap but I am confident someone there should have it in stock. =A0 Regards The other Canadian Frers 33 Owner. =A0 Rod =A0 =A0 ---1964014314-550056557-1359896115=:98790 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable

Bill,

Actually in retrospect Rod is correct it is 3/4 inch.

Frank Albert

--- On Sun, 2/3/13, Rod Stright <StrightR= @eastlink.ca> wrote:

From: Rod Stright <StrightR@eastlink.ca>Subject: [frers-list]Replace Cabin Sole
To: frers-list@lists.frers33.co= m
Date: Sunday, February 3, 2013, 5:09 AM

= Hi Bill,

=

= There a couple of suppliers here in Halifax. There should be some in = Montreal/Toronto. It is 3/4" Marine Teak and Holly cabin sole.&= nbsp; It isn't cheap but I am confident someone there should have it = in stock.

=
= Regards
= The other Canadian Frers 33 Owner.
=
= Rod
=

---1964014314-550056557-1359896115=:98790-- From frers-list@lists.frers33.com Sun Feb 3 15:08:08 2013 From: frers-list@lists.frers33.com (frers-list@lists.frers33.com) Date: Sun, 3 Feb 2013 10:08:08 -0500 (EST) Subject: [frers-list]Yacht Racing Association of Long Island Sound In-Reply-To: <000001ce017d$7235eec0$56a1cc40$@sbcglobal.net> References: <000001ce017d$7235eec0$56a1cc40$@sbcglobal.net> Message-ID: <8CFD03768C4B602-1D38-73E31@webmail-m019.sysops.aol.com> This is a multi-part message in MIME format. ----------MB_8CFD03768D2FE42_1D38_18A9E3_webmail-m019.sysops.aol.com Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; charset="us-ascii" always a chance -----Original Message----- From: Robert Farnum To: frers-list Sent: Sat, Feb 2, 2013 11:43 am Subject: [frers-list]Yacht Racing Association of Long Island Sound I checked the YRALIS certificate holders for last year: Audacious Farnum 40852 A.W.O.L Horton 47308 Bon Coeur Arnold Lesser 41547 Brilliant Kelly, Jr 42833 Checkmate Joyce Oberdorf 40697 =20 Brilliant and Audacious have been at the Branford/Pine Orchard series. Any = chance of the others making it this year? No need to get an ECSA certificat= e since we are racing one design. =20 Bob Farnum =20 ----------MB_8CFD03768D2FE42_1D38_18A9E3_webmail-m019.sysops.aol.com Content-Transfer-Encoding: quoted-printable Content-Type: text/html; charset="us-ascii"

always a chance

-----Original Message-----
From: Robert Farnum <rsfarnum@sbcglobal.net>
To: frers-list <frers-list@lists.frers33.com>
Sent: Sat, Feb 2, 2013 11:43 am
Subject: [frers-list]Yacht Racing Association of Long Island Sound

I checked the YRALIS certificate holders for last = year:

Audacious = ; Farnum &= nbsp; 40852

A.W.O.L &= nbsp; Horton &nb= sp; = 47308

Bon Coeur = ; Arnold Lesser 41547

Brilliant = ; Kelly, Jr &nbs= p; &= nbsp; 42833

Checkmate = ; Joyce Oberdorf 40697

Brilliant and Audacious have been at the Branford/= Pine Orchard series. Any chance of the others making it this year? No need = to get an ECSA certificate since we are racing one design.

Bob Farnum

----------MB_8CFD03768D2FE42_1D38_18A9E3_webmail-m019.sysops.aol.com-- From frers-list@lists.frers33.com Sun Feb 3 15:24:50 2013 From: frers-list@lists.frers33.com (frers-list@lists.frers33.com) Date: Sun, 3 Feb 2013 15:24:50 +0000 (UTC) Subject: [frers-list]Replace teak and holly In-Reply-To: <446276700.717988.1359902606902.JavaMail.root@sz0089a.westchester.pa.mail.comcast.net> Message-ID: <963273821.719101.1359905090910.JavaMail.root@sz0089a.westchester.pa.mail.comcast.net> ------=_Part_719100_1663791744.1359905090909 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit Bill; I got my Teak & Holly plywood from Boulter Plywood in Somerville , MA, they had better pricing than Jamestown. http :// www . boulterplywood .com/ My original sole was 3/4" so I replaced with the same. They also sell just the veneer as well, if you would rather that. I used the old floorboard as the template, using the Holly Strips as an alignment tool, after removing all the cleats on the bottom of the floor board. I also drill thru the holes for the ladder base, table leg bases and screw holes for attachment to the stingers as additional reference points. These were very helpful in dialing in the new piece after the original rough cut. I thru bolted the two pieces together face to face and used a grinder and orbital sander to match the outside edges and trace out the inspection port. Then using the original as a guide outlined where I needed to remove material in the after section where it is to thick. In order to try and stop the water intrusion in the new piece I coated it with 3 coats of clear coat epoxy, followed by varnish. Hope this is helpful. Ed Putnam Mariposa Marshfield Hills ------=_Part_719100_1663791744.1359905090909 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable <= div style=3D'font-family: Arial; font-size: 12pt; color: #000000'>Bill;
=
I got my Teak & Holly plywood from Boulter Plywood in Somerville, M= A, they had better pricing than Jamestown. http://www.boulterplywood.= com/ My original sole was 3/4" so I replaced with the same. The= y also sell just the veneer as well, if you would rather that.
I used the old floorboard as the template, using the Holly Strips as an a= lignment tool, after removing all the cleats on the bottom of the floor boa= rd. I also drill thru the holes for the ladder base, table leg bases = and screw holes for attachment to the stingers as additional reference poin= ts. These were very helpful in dialing in the new piece after the ori= ginal rough cut. I thru bolted the two pieces together face to face a= nd used a grinder and orbital sander to match the outside edges and trace o= ut the inspection port. Then using the original as a guide outlined w= here I needed to remove material in the after section where it is to thick.= In order to try and stop the water intrusion in the new piece I coat= ed it with 3 coats of clear coat epoxy, followed by varnish.

Hope th= is is helpful.

Ed Putnam
Mariposa
Marshfield Hills

=
------=_Part_719100_1663791744.1359905090909-- From frers-list@lists.frers33.com Mon Feb 4 17:51:52 2013 From: frers-list@lists.frers33.com (Courtney Thomas) Date: Mon, 04 Feb 2013 12:51:52 -0500 Subject: [frers-list]Selden Removable Bowsprit In-Reply-To: References: Message-ID: <510FF538.7000604@bellsouth.net> I might be interested depending on price of course. You can email me at ccthomas01@hotmail.com. Any chance of a picture and installation instruction ? Thanks, C.Thomas On 2/1/2013 8:40 PM, Michael Argyelan wrote: > I bought and installed a Selden sprit last year and it was great for > short-handed sailing. However, I'm sort of over it and wondering if > anyone has any interest in one. I have an asym to go with it if > there's an interest in that as well. Figured I'd start here and go > from there. Thanks to all for the great replies to my other posts. > I'm going to work with the head rigger at the yard and my local sail > maker to get the tune job on the rig just right. I'll keep everyone > in the loop if there's interest in the results. > > Cheers, > > > > Michael Argyelan > > From frers-list@lists.frers33.com Mon Feb 4 17:54:27 2013 From: frers-list@lists.frers33.com (Courtney Thomas) Date: Mon, 04 Feb 2013 12:54:27 -0500 Subject: [frers-list]Replace cabin sole In-Reply-To: <6E52EF92-031F-4DFD-91FB-365792DE2E21@videotron.ca> References: <6E52EF92-031F-4DFD-91FB-365792DE2E21@videotron.ca> Message-ID: <510FF5D3.6090002@bellsouth.net> Bill, I'm in Nova Scotia. Do you ever sail over this way ? Cordially, C.Thomas On 2/2/2013 7:00 PM, Bill Thompson wrote: > Hi all, > > Want to replace original - I think 1/4" teak and holly veneer over marine plywood. Does anyone know where to find a supplier? Because I'm in Canada would be happy to buy the veneer and apply it to locally available marine plywood. > > All ideas appreciated. > > Bill Thompson > d'Ad lib > Montreal > > William Thompson > Sent from my iPad > _______________________________________________ > frers-list mailing list > frers-list@lists.frers33.com > http://lists.frers33.com/mailman/listinfo/frers-list > From frers-list@lists.frers33.com Mon Feb 4 18:06:48 2013 From: frers-list@lists.frers33.com (Bill Thompson) Date: Mon, 04 Feb 2013 10:06:48 -0800 Subject: [frers-list]Replace cabin sole In-Reply-To: <510FF5D3.6090002@bellsouth.net> References: <6E52EF92-031F-4DFD-91FB-365792DE2E21@videotron.ca> <510FF5D3.6090002@bellsouth.net> Message-ID: Not in this years plan,but would really like to... Bill William Thompson Sent from my iPad On 2013-02-04, at 9:54 AM, Courtney Thomas wrote: > Bill, > > I'm in Nova Scotia. Do you ever sail over this way ? > > Cordially, > > C.Thomas > > > On 2/2/2013 7:00 PM, Bill Thompson wrote: >> Hi all, >> >> Want to replace original - I think 1/4" teak and holly veneer over marine plywood. Does anyone know where to find a supplier? Because I'm in Canada would be happy to buy the veneer and apply it to locally available marine plywood. >> >> All ideas appreciated. >> >> Bill Thompson >> d'Ad lib >> Montreal >> >> William Thompson >> Sent from my iPad >> _______________________________________________ >> frers-list mailing list >> frers-list@lists.frers33.com >> http://lists.frers33.com/mailman/listinfo/frers-list > > _______________________________________________ > frers-list mailing list > frers-list@lists.frers33.com > http://lists.frers33.com/mailman/listinfo/frers-list From frers-list@lists.frers33.com Tue Feb 5 22:03:52 2013 From: frers-list@lists.frers33.com (Michael Argyelan) Date: Tue, 5 Feb 2013 16:03:52 -0600 Subject: [frers-list]Re: frers-list digest, Vol 1 #616 - 3 msgs In-Reply-To: <20130205060205.3AD4061CD2@mailman.siteprotect.com> References: <20130205060205.3AD4061CD2@mailman.siteprotect.com> Message-ID: <-2176499244777164063@unknownmsgid> Hello everyone. It looks like me gear is sold. Thanks for all of your inquiries. Sent from Captain Michael's iPhone Operations Manager Go Sailing Chicago Where our name says it all, Go Sailing Chicago! www.gosailingchicago.com info@gosailingchicago.com 773.710.SAIL (7245) 773.259.7047 - mobile On Feb 5, 2013, at 12:02 AM, "frers-list-request@lists.frers33.com" wrote: > Send frers-list mailing list submissions to > frers-list@lists.frers33.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.frers33.com/mailman/listinfo/frers-list > or, via email, send a message with subject or body 'help' to > frers-list-request@lists.frers33.com > > You can reach the person managing the list at > frers-list-admin@lists.frers33.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of frers-list digest..." > > > Today's Topics: > > 1. Re: Selden Removable Bowsprit (Courtney Thomas) > 2. Re: Replace cabin sole (Courtney Thomas) > 3. Re: Replace cabin sole (Bill Thompson) > > --__--__-- > > Message: 1 > Date: Mon, 04 Feb 2013 12:51:52 -0500 > From: Courtney Thomas > To: frers-list@lists.frers33.com > Subject: Re: [frers-list]Selden Removable Bowsprit > Reply-To: frers-list@lists.frers33.com > > I might be interested depending on price of course. > > You can email me at > > ccthomas01@hotmail.com. > > Any chance of a picture and installation instruction ? > > Thanks, > > C.Thomas > > > On 2/1/2013 8:40 PM, Michael Argyelan wrote: >> I bought and installed a Selden sprit last year and it was great for >> short-handed sailing. However, I'm sort of over it and wondering if >> anyone has any interest in one. I have an asym to go with it if >> there's an interest in that as well. Figured I'd start here and go >> from there. Thanks to all for the great replies to my other posts. >> I'm going to work with the head rigger at the yard and my local sail >> maker to get the tune job on the rig just right. I'll keep everyone >> in the loop if there's interest in the results. >> >> Cheers, >> >> >> >> Michael Argyelan >> >> > > > --__--__-- > > Message: 2 > Date: Mon, 04 Feb 2013 12:54:27 -0500 > From: Courtney Thomas > To: frers-list@lists.frers33.com > Subject: Re: [frers-list]Replace cabin sole > Reply-To: frers-list@lists.frers33.com > > Bill, > > I'm in Nova Scotia. Do you ever sail over this way ? > > Cordially, > > C.Thomas > > > On 2/2/2013 7:00 PM, Bill Thompson wrote: >> Hi all, >> >> Want to replace original - I think 1/4" teak and holly veneer over marine plywood. Does anyone know where to find a supplier? Because I'm in Canada would be happy to buy the veneer and apply it to locally available marine plywood. >> >> All ideas appreciated. >> >> Bill Thompson >> d'Ad lib >> Montreal >> >> William Thompson >> Sent from my iPad >> _______________________________________________ >> frers-list mailing list >> frers-list@lists.frers33.com >> http://lists.frers33.com/mailman/listinfo/frers-list >> > > > --__--__-- > > Message: 3 > Subject: Re: [frers-list]Replace cabin sole > From: Bill Thompson > Date: Mon, 04 Feb 2013 10:06:48 -0800 > To: "frers-list@lists.frers33.com" > Reply-To: frers-list@lists.frers33.com > > Not in this years plan,but would really like to... > > Bill > > William Thompson > Sent from my iPad > > On 2013-02-04, at 9:54 AM, Courtney Thomas wrote: > >> Bill, >> >> I'm in Nova Scotia. Do you ever sail over this way ? >> >> Cordially, >> >> C.Thomas >> >> >> On 2/2/2013 7:00 PM, Bill Thompson wrote: >>> Hi all, >>> >>> Want to replace original - I think 1/4" teak and holly veneer over marine plywood. Does anyone know where to find a supplier? Because I'm in Canada would be happy to buy the veneer and apply it to locally available marine plywood. >>> >>> All ideas appreciated. >>> >>> Bill Thompson >>> d'Ad lib >>> Montreal >>> >>> William Thompson >>> Sent from my iPad >>> _______________________________________________ >>> frers-list mailing list >>> frers-list@lists.frers33.com >>> http://lists.frers33.com/mailman/listinfo/frers-list >> >> _______________________________________________ >> frers-list mailing list >> frers-list@lists.frers33.com >> http://lists.frers33.com/mailman/listinfo/frers-list > > > --__--__-- > > _______________________________________________ > frers-list mailing list > frers-list@lists.frers33.com > http://lists.frers33.com/mailman/listinfo/frers-list > > > End of frers-list Digest From frers-list@lists.frers33.com Wed Feb 20 18:37:23 2013 From: frers-list@lists.frers33.com (Bill Thompson) Date: Wed, 20 Feb 2013 11:37:23 -0700 Subject: [frers-list]Older headsail Message-ID: <52178734-57BC-4EAC-81AA-D64B9E877A28@videotron.ca> Hi all, I'm in the market for an older, preferably dacron headsail for deliveries, cruising... Would probably prefer a nb 2 but will consider anything. Thanks, Bill Thompson d'Ad lib Montreal 514 942-69 William Thompson Sent from my iPad